Steering Damper with Mounting Kit

Item no.: MTP18152

119,00 €

including 19% VAT., no shipping costsfrom 100 € Free shipping within the EU

Colour

Model dependent product

To check if this article fits your machine, please select your model in advance.

Select model

Available now!

Category: Steering Dampers

Description

CNC- Steering Damper

Adjustment wheel on compensating tank
Dial at the equalizer tank
Adjustable in 24 ways
Zero-backlash ball joint with 8 mm drilling
Excellent quality
with nitrogen chamber - for better damping in fast strokes
not compare with the quality of cheaper suppliers
Large adjustment range
suitable for many motorcycles
only for Racing and Shows , without ABE

Measurements:

Full length 255 mm
Working Stroke 68mm
Stroke Axle 8mm
Diameter of Case for Holder 24,5mm
Case Diameter max. 27 mm with reservoir 53 mm

Holder

CNC machined aluminum bracket
Free-play ball joint with 8 mm bore
an M6 clamping screw

Mounting kit:

CNC machined aluminum
T6061 Alu black anodised
with mounting screw kit - possibly screws must be shortened

Without assembly instructions

but as shown in the pictures on the front tank holder, the large brackets are clamped once underneath the frame, the round holder is mounted under the fork bridge on the left standpipe, the heights adjusted with the included adapter and the steering damper interposed, the screws with blue screw securing means to secure, these you get if necessary in our shop.