Speedometerlight - red Full beam - blue Neutral - green ( for switched plus ) Indicator - 2x yellow ( 1x indicator left and 1x right ) Ground - 2x black ( 1x for the dash board lighting - 1x for LED display )
Approval for the speedos in Germany:
Motorcycle speedos don't have an e-mark or a vehicle type approval. This speedo can be used for motorcycles, that had a homologation performed by the federal office for motor traffic (KBA) according to german right in the late 90s. ( top speed up to 160 km/h, original speedo K-value 1,4 ) The approval for newer motorcycles, that had a homologation according to the EG right, depends on the discretion of the inspector. (TÜV, Dekra, etc.)
The determantion of the K-value - in case the K-value of the speedo is unknown:
You can put a mark on the visible square of the speedometer cable from the original speedometer as a counting help.
Turn the wheel 10 times and count the rotations of the square of the speedo wire.
K = the amount of the rotations from the square of the speedometer cable multiplied by 10,
divided by the wheel circumference in cm
K = 10 x X : Y
X = amount of rotations Y = circumference of the wheel in cm
Question on item
Login / Dealer login
There are no items in your basket