CNC milled aluminum brake lever and clutch lever for MCS Brembo Brake Master Cylinder
new function: on the brake lever the variable center distance can be adjusted like on the original Brembo lever by means of a snap-in adjuster on the front side. following distances are available 19mm 20mm and 21mm with this function the lever force can be influenced the further inward, i.e. 19mm the less lever force has to be used.
German TÜV approved! Made in Germany high-strength aluminum as in aircraft construction milled from the full aloy 6-way adjustable foldable, has the advantage in a fall over that the lever can fold up without breaking off but is protected in normal operation by a mechanism against folding up The lever is adjustable in length by means of dovetail connection by 35mm Depending on the model, the completely extended state corresponds approximately to the original length The anodization of RAXIMO lever meets the highest quality standards All screw connections comply with the DIN standard and are tightened before delivery with the torque wrench The CNC levers are delivered with German ABE and are therefore registration free. Only with us you can choose 9 different colors for the main body, the middle part, the end part and the adjuster, and thus offer 6625 different color combinations that makes your bike unique.
The levers are made according to your selected color combinations and will be shipped within one day. The attachments are always different, the photo is just a sample picture.
1 x brake lever 1 x clutch lever 1 x ABE incl. Assembly instructions