2 color anodized CNC milled semicircular crash pads (diameter of 64 mm)
2 impact protection applications made of plastic with a length of 8 cm
2 aluminium-guide sleeves
1 attachment screw with a length of 70 mm
1 attachment screw with a length of 95 mm
2 attachment screws with a length of 130 mm
1 aluminium attachment bracket for the installation to the engine mount
The fairing doesn't have to be cut out for the installation of the CNC frame sliders. Look at the second image for an example of the installation.
The shape and the construction of the impact protectors are intended to absorb the collision in the event of a crash Its oblong shape spreads the forces over the whole surface. The semicircular head of the crash pad prevents from getting stuck with road bumps.
If you are not a mechanic, please contact a workshop. Consider before the installation : Dont loose both engine mount screws at the same time when installing the frame sliders. Install them one by one. Pay attention to the torques of the engine attachment screws.
Question on item
Login / Dealer login
There are no items in your basket
is only for certain motorcycle models.
Please choose your motorcycle model to get the right article:
or choose products specifically for your vehicle
You will automatically be redirected to the category of the article with "Find Article". If the article is not displayed there, we unfortunately do not have it for your motorcycle.
With the button "All items for your motorcycle" of the results page you can see what we have for this model on offer.
Only if you know for sure, that this article is suitable for you, close the window here!