CNC Aluminium Frame Sliders Crash Pads green

Item no.: MTP10416-003

69,00 €

including 19% VAT., plus shippingfrom 100 € Free shipping within the EU

Colour

reset selection

Model dependent product

To check if this article fits your machine, please select your model in advance.

Short supply

Shipping is possible on: 10.05.2021
expected delivery date: 15.05.2021

Category: Crash pads

Description

CNC Aluminium Frame Sliders With Attachment Kit

Product contents:

1 aluminium spacer with a length of 40 mm
1 aluminium spacer with a length of 62 mm
2 color anodized CNC milled semicircular crash pads (diameter of 64 mm)
2 impact protection applications made of plastic with a length of 8 cm
2 aluminium-guide sleeves
1 attachment screw with a length of 70 mm
1 attachment screw with a length of 95 mm
2 attachment screws with a length of 130 mm
1 aluminium attachment bracket for the installation to the engine mount

The fairing doesn't have to be cut out for the installation of the CNC frame sliders.
Look at the second image for an example of the installation.

The shape and the construction of the impact protectors are intended to absorb the collision in the event of a crash
Its oblong shape spreads the forces over the whole surface.
The semicircular head of the crash pad prevents from getting stuck with road bumps.

Attention:

If you are not a mechanic, please contact a workshop.
Consider before the installation :
Dont loose both engine mount screws at the same time when installing the frame sliders.
Install them one by one.
Pay attention to the torques of the engine attachment screws.