2 Universal - RFY - Gas Pressure Dampers With Expansion Reservoir
Replacement of motorcycle suspension struts
- Made of casted aluminium and anodized aluminium
- Color: silver - white spring
- Expansion reservoir filled with nitrogen
- Spring preload can be adjusted continuously
- Strength of the spring: 7 mm
- Length eyelet center to eyelet center 320 mm
- Full length approx. 350 mm
- Length extandable by approx. 15 mm (by unscrewing the lower suspension strut eyelet)
- Lower suspenison strut eyelet is screwed in by approx. 24 mm
- Upper eyelet sleeves with a diameter of 10 mm are detachable
- Lower fork bracket with a thread of 8 mm
- Lower fork bracket - inner distance approx. 20,5 mm
- 2 eyelet sleeves with 10 mm diameter
- 2 hook wrenches
Consider the space you need by the expansion reservoir and the original length before the installation
No road approval - only for shows and races
Motorcycle suspension struts are a combination of a coil spring and a hydraulically acting damper
(vibration damper).
Suspension struts are one of these parts, that affect the handling and
contribute to the granting of the vehicle type approval
The switch of the original coil spring with another one like for example a progressive instead of
a linear spring rate as well as the exchange of the whole suspension strut is subject to approval
Changes to the vibration damper or the exchange of it is not subject to approval.
This means :
If the original spring gets adapted- the damper is not subject to approval.